Skip to main content

Successfully Repair the Cast Iron Engine Block by RA Power

 Our company specializes in cast iron engine block repairs. Cast iron and aluminium parts can all be successfully repaired for damage from accidents using the metal lock and metal stitching procedure, which is a cold process because no heat is produced.

The advantages of undertaking crack repair in cast iron engine blocks are the following:-

  1. The crack repair and casting damage restoration can be done on-site, eliminating the need to remove the engine block and send it to the workshop.
  2. To handle the crack repair and repair of damaged engine block casting by metal lock, metal surgery, and metal stitching, we send a team of engineers to the site with portable tools and consumables.
  3. All of our crack repair technicians who use the metal lock and metal stitching process have current CDC certifications and are capable of last-minute travel anywhere in the world.
For more information about Cast iron engine block repair, cold stitching, cold stitching cast iron, cold metal stitching, etc., and our service please visit a website. Send an email to raj.shahani@rapowersolutions.com, info@rapowersolutions.com call us at +91-9582647131 and tel. +91-124–4378292.

Comments

Post a Comment

Popular posts from this blog

Crankpin machining is required in case of following

  Crankpin machining is required in case of the following damage to the crankpin. Development of excessive taper & ovality on a crankpin.  Seizure of crankpin bearing Development of bearing marks and pitting on crankpins. Due to above defects it is necessary to get the crankpin machining undertaken.  RA Power Solutions have more than 41 years of experience in undertaking machining of crankpin onsite up to 700mm. There is no requirement of removing the crankshaft from the engine block and transporting to the workshop. We have a team of experienced technicians who fly all over the world to undertake crankpin machining on site. For More Information Visit Our Sites: http://connectingrodrepair.com/, https://metalstitchinglocking.com/,  marineengine.in , http://turbineshaft.in/, http://rebabbittingbearing.com/, https://engineoverhaulingservices.com/
Post a Comment
Read more

Metal Stitching & Metal locking of Engine Block

  RA Power solutions have been  undert aking repair & maintenance of heavy equipment in industries, power plants, and diesel engines installed on the vessel for the last more than 4 decades.     We have experienced that in spite of following the rigid maintenance schedule mentioned in the maintenance manual of the  manufacturer serious  accidents do take place breaking the casing of the engine, compressor, Heavy engineering equipment into pieces or developing multiple cracks.       RA Power Solutions recommended repair of damaged cast iorn casting,  Aluminium  bronze components by metal lock/metal stitching process having following advantages:        i ) The main advantage of  repair of  damaged or cracked engine block   by  metal lock / metal stitching  process is that it is cold  method of repair  and no heat...
Post a Comment
Read more

Journal Bearing Manufacturer By RA Power Solutions

  Crank pin journal  of Wartsila 18V32 was reported to be damaged by one of our client in Southeast Coast of Africa. RA Power Solutions team of two technicians was deputed and following were the main observations: On visual inspection it was observed that  crank pin no. 2 and Crank pin nos 6 were severely scored with bearing line marks having approximate depth of 0.5 mm. The hardness was observed between 30 and 50 HRC at different spots. On undertaking the MPI of crankpin no. 2 and crankpin no. 6, only multiple surface cracks were observed The crankpins of the crankshaft were checked for taper and ovality and maximum ovality of 0.6 mm was observed. After the initial inspection of crankpin journal 2 and crankpin journal no. 6, the  crankshaft grinding  was done by latest design of onsite crankshaft grinding equipment. The crankshaft grinding equipment having the range of 260 to 300 mm was used. Following process for crank pin journal repair was adopted. Rough gri...
Post a Comment
Read more