Skip to main content

Engine Block Repair

RA Power Solutions Pvt. Ltd. undertakes repair of crack and damage engine block made out of cast iron or aluminium. All the parts which are manufactured out of cast iron and aluminium can be successfully repaired for crack or damage due to accident by metal lock and metal stitching process which is cold process as no heat is generated.

Following are the advantages of undertaking crack repair in cast iron and aluminium components by metal lock and metal stitching.

    • No need of removing the engine block and sending it to the workshop as the crack repair and damage casting repair can be undertaken onsite.
    • We depute our team of engineers with portable equipments and consumables to the site to undertake the crack repair and repair of damage casting by metal lock, metal surgery  and metal stitching.
    • The welding process of repair of crack is now outdated as it creates stresses and in most of the cases requires machining after the repairs.
    • We use high grade of consumables of metal lock and keys etc imported from UK and execute all the crack repairs with guarantee.
    • The planning of execution of repair is prepared by the senior engineer and executed by our technicians. Our senior technicians have hands on experience of more than 38 years.
    • We extend crack repair services all over the world to the shipping companies and the industries.
    • All our technicians engaged in crack repair by metal lock and metal stitching process are having valid CDC certificates and can travel to any part of the world in a short notice.

    For more information on cast iron block repair, cast iron head repair and engine block metal locking, fix cracked engine block,Metal locking a crack engine block ,contact us on raj.shahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91-9582647131


    Labels:

    Comments

    Post a Comment

    Popular posts from this blog

    Crankpin machining is required in case of following

      Crankpin machining is required in case of the following damage to the crankpin. Development of excessive taper & ovality on a crankpin.  Seizure of crankpin bearing Development of bearing marks and pitting on crankpins. Due to above defects it is necessary to get the crankpin machining undertaken.  RA Power Solutions have more than 41 years of experience in undertaking machining of crankpin onsite up to 700mm. There is no requirement of removing the crankshaft from the engine block and transporting to the workshop. We have a team of experienced technicians who fly all over the world to undertake crankpin machining on site. For More Information Visit Our Sites: http://connectingrodrepair.com/, https://metalstitchinglocking.com/,  marineengine.in , http://turbineshaft.in/, http://rebabbittingbearing.com/, https://engineoverhaulingservices.com/
    Post a Comment
    Read more

    Metal Stitching & Metal locking of Engine Block

      RA Power solutions have been  undert aking repair & maintenance of heavy equipment in industries, power plants, and diesel engines installed on the vessel for the last more than 4 decades.     We have experienced that in spite of following the rigid maintenance schedule mentioned in the maintenance manual of the  manufacturer serious  accidents do take place breaking the casing of the engine, compressor, Heavy engineering equipment into pieces or developing multiple cracks.       RA Power Solutions recommended repair of damaged cast iorn casting,  Aluminium  bronze components by metal lock/metal stitching process having following advantages:        i ) The main advantage of  repair of  damaged or cracked engine block   by  metal lock / metal stitching  process is that it is cold  method of repair  and no heat...
    Post a Comment
    Read more

    Journal Bearing Manufacturer By RA Power Solutions

      Crank pin journal  of Wartsila 18V32 was reported to be damaged by one of our client in Southeast Coast of Africa. RA Power Solutions team of two technicians was deputed and following were the main observations: On visual inspection it was observed that  crank pin no. 2 and Crank pin nos 6 were severely scored with bearing line marks having approximate depth of 0.5 mm. The hardness was observed between 30 and 50 HRC at different spots. On undertaking the MPI of crankpin no. 2 and crankpin no. 6, only multiple surface cracks were observed The crankpins of the crankshaft were checked for taper and ovality and maximum ovality of 0.6 mm was observed. After the initial inspection of crankpin journal 2 and crankpin journal no. 6, the  crankshaft grinding  was done by latest design of onsite crankshaft grinding equipment. The crankshaft grinding equipment having the range of 260 to 300 mm was used. Following process for crank pin journal repair was adopted. Rough gri...
    Post a Comment
    Read more